I built a better bandsaw
Not An Engineer
I built a better bandsaw
18:51
Can I make a precision component from scrap metal?
Not An Engineer
Can I make a precision component from scrap metal?
16:05
Are gears that bend, better?
Not An Engineer
Are gears that bend, better?
35:14
I made a mechanical counter, but it's a little bit different.
Not An Engineer
I made a mechanical counter, but it's a little bit different.
38:40
Precision machine control is harder than it looks (it looks hard)
Not An Engineer
Precision machine control is harder than it looks (it looks hard)
32:52
The answer is DRAWERS! (I don’t care what the question is)
Not An Engineer
The answer is DRAWERS! (I don’t care what the question is)
10:33
Building precision machines is simple, until it isn't.
Not An Engineer
Building precision machines is simple, until it isn't.
39:53
How I gave my lathe a "nut" button, and why I'll never look back
Not An Engineer
How I gave my lathe a "nut" button, and why I'll never look back
12:04
Putting an end to the WORST kind of gears.
Not An Engineer
Putting an end to the WORST kind of gears.
15:32
I made a parallel axis tripteron
Not An Engineer
I made a parallel axis tripteron
32:30
I made a precision gearbox - with NO GEARS.
Not An Engineer
I made a precision gearbox - with NO GEARS.
30:09
I just want to make things ROUND (accurately)
Not An Engineer
I just want to make things ROUND (accurately)
10:53
I need a PRECISION straight-edge, so I made three
Not An Engineer
I need a PRECISION straight-edge, so I made three
12:29
I made a steady rest because I suck at planning
Not An Engineer
I made a steady rest because I suck at planning
14:55
I "fixed" this cheap Chinese tool
Not An Engineer
I "fixed" this cheap Chinese tool
11:02
My DIY CNC mill eats metal
Not An Engineer
My DIY CNC mill eats metal
10:24
I built a CNC mill because I have no self control
Not An Engineer
I built a CNC mill because I have no self control
9:46